Damage performance of TiO2/SiO2 thin film components induced by a long-pulsed laser

In order to study the long-pulsed laser induced damage performance of optical thin films, damage experiments of TiO2/SiO2 films irradiated by a laser with 1 ms pulse duration and 1064 nm wavelength are performed. In the experiments, the damage threshold of the thin films is measured. The damages are observed to occur in isolated spots, which enlighten the inducement of the defects and impurities originated in the films. The threshold goes down when the laser spot size decreases. But there exists a minimum threshold, which cannot be further reduced by decreasing the laser spot size. Optical microscopy reveals a cone-shaped cavity in the film substrate. Changes of the damaged sizes in film components with laser fluence are also investigated. The results show that the damage efficiency increases with the laser fluence before the shielding effects start to act.

- Damage performances of TiO2/SiO2 films by a long-pulse laser are investigated.
- Long-pulse lasers not only damage film coatings but also destroy the substrates.
- Damage threshold decreases with laser spot size and finally keeps constant.
- Damage size increases with laser fluence and finally keeps constant.
- Damage efficiency increases with laser fluence at first and finally decreases.