Laser energy density, structure and properties of pulsed-laser deposited zinc oxide films

Zinc oxide thin films were deposited on soda lime glass substrates by pulsed laser deposition in an oxygen-reactive atmosphere at 20 Pa and a constant substrate temperature at 300 °C. A pulsed KrF excimer laser, operated at 248 nm with pulse duration 10 ns, was used to ablate the ceramic zinc oxide target. The structure, the optical and electrical properties of the as-deposited films were studied in dependence of the laser energy density in the 1.2-2.8 J/cm2 range, with the aid of X-ray Diffraction, Atomic Force Microscope, Transmission Spectroscopy techniques, and the Van der Pauw method, respectively. The results indicated that the structural and optical properties of the zinc oxide films were improved by increasing the laser energy density of the ablating laser. The surface roughness of the zinc oxide film increased with the decrease of laser energy density and both the optical bang gap and the electrical resistivity of the film were significantly affected by the laser energy density.

Research highlights► ZnO thin films were grown by pulsed laser deposition at 20 Pa oxygen ambient and 300 C. ► The focusing lens position was changed to select the laser energy density. ► The energy gap and the resistivity increased with the energy density. ► Film thickness and surface roughness decreased with increasing energy density. ► The average optical transmission was within the 80-90% for all energy density values.