ZnO:Ag film growth on Si substrate with ZnO buffer layer by rf sputtering

ZnO buffer layers were deposited on n-Si (1 0 0) substrate by rf magnetron sputtering at a lower power of 40 W. Then Ag-doped ZnO (SZO) films were deposited on buffered and non-buffered Si at a higher sputtering power of 100 W. The effects of buffer layer on the structural, electrical and optical properties of SZO films were investigated. The three-dimensional island growth process of ZnO buffer layer was discussed. The energy band diagram of p-SZO/n-Si heterojunction was constructed based on Anderson's model. Results show the ZnO buffer layer leads to better properties of SZO film, including larger grain size, smoother surface, higher carrier mobility, better rectifying behavior, lower interface state density, and weaker deep-level emission. It is because the ZnO buffer layer effectively relaxes the partial stress induced by the large lattice mismatch between SZO and Si.

Research highlights▶ ZnO buffer layers were used for Ag-doped ZnO films on Si substrates. ▶ The buffer layers relax the partial stress induced by the lattice mismatch between films and substrates. ▶ The properties of Ag-doped ZnO films were effectively improved.