Substrate pre-treatment of flexible material for printed electronics with carbon nanotube based ink

In this work, an innovative solution was developed in order to make paper-based material, used traditionally in the packaging and labelling industries, compatible with the printing of functional conductive inks. In order to avoid the deterioration of the ink functionalities due to different paper properties, a UV-curing inkjettable primer layer was developed. This pre-treatment enables homogeneous surface properties such as smoothness, absorption capacity and surface energy to be obtained, for almost all the examined substrates. To confirm the positive impact of such pre-treatment, conductivity has been measured when using a new conductive ink, combining the processability of the PEDOT-PSS conductive polymer with the high electrical properties of carbon nanotubes (CNTs). Significant improvement has been measured for all paper materials and similar conductivity (close to reference PET film) has been obtained whatever the substrate involved. This pre-treatment now makes it possible to consider paper-based material as a potential substrate for printed electronics. In this case, the substrate adaptation technique offers an innovative solution to produce low-cost and flexible electronics.

Research highlights▶ Innovative solution to make paper-based material suitable for printed electronics. ▶ Development of an UV-cured and inkjettable solution. ▶ Virgin and treated substrate characterization. ▶ Evaluation of the treatment with a carbon nanotube based inkjet ink.