On high velocity impact of micro-sized metallic particles in cold spraying

In this study, a systematic examination of particle deformation behaviour in cold spraying was conducted for Cu particle using both the Lagrangian and Arbitrary Lagrangian Eulerian (ALE) methods. It is found that the meshing size in modelling by Largrangian method influences significantly the localized shear instability at interface areas. With refining the meshing size the onset velocity for interface shear instability decreases. The extrapolation of these results yields a reasonable critical velocity comparable to the actual one in cold spray practice. The results indicate that both the flattening ratio and compression ratio of the deformed particles increase with the increase in particle velocity, which are in good agreement with the experiment results. The ALE method provides a suitable way to examine the particle deformation in cold spraying. Moreover, the numerical results also show that there exists the similarity for the deformation of particles of different diameters.