کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5425498 | 1395857 | 2006 | 7 صفحه PDF | دانلود رایگان |
Stoichiometric and highly-defective TiO2(1 1 0) surfaces (called as yellow and blue, respectively) were exposed to Mo(CO)6 vapours in UHV and in a reactive O2 atmosphere. In the case of yellow-TiO2, an O2 reactive atmosphere was necessary to obtain the Mo(CO)6 decomposition at 450 °C with deposition of MoOx nanostructures where, according to core level photoemission data, the Mo+4 state is predominant. In the case of blue-TiO2 it was possible to obtain Mo deposition both in UHV and in an O2 atmosphere. A high dose of Mo(CO)6 in UHV on blue-TiO2 allowed the deposition of a thick metallic Mo layer. An air treatment of this sample at 580 °C led to the elimination of Mo as MoO3 and to the formation of a transformed layer of stoichiometry of Ti(1âx)MoxO2 (where x is close to 0.1) which, according to photoelectron diffraction data, can be described as a substitutional near-surface alloy, where Mo+4 ions are embedded into the titania lattice. This embedding procedure results in a stabilization of the Mo+4 ions, which are capable to survive to air exposure for a rather long period of time. After exposure of the blue-TiO2(1 1 0) substrate to Mo(CO)6 vapours at 450 °C in an O2 atmosphere it was possible to obtain a MoO2 epitaxial ultrathin layer, whose photoelectron diffraction data demonstrate that is pseudomorphic to the substrate.
Journal: Surface Science - Volume 600, Issue 16, 15 August 2006, Pages 3345-3351