Adsorption and electrically stimulated desorption of the triblock copolymer poly(propylene sulfide-bl-ethylene glycol) (PPS-PEG) from indium tin oxide (ITO) surfaces

Protein-resistant triblock copolymers, poly(propylene sulfide-bl-ethylene glycol) (PPS-PEG) have been previously demonstrated to chemisorb onto gold surfaces forming monolayers that resist non-specific protein adsorption and are stable against oxidation. In this paper, we report on the adsorption of PPS-PEG onto a transparent and electrically conductive substrate, indium tin oxide (ITO). In addition, we demonstrate the controlled desorption of PPS-PEG by applying an electrical stimulus. We have used three complementary surface characterization techniques: variable angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to analyze the adsorption and electro-desorption of PPS-PEG from an ITO surface. All three methods confirmed the formation of PPS-PEG adlayers on the ITO surfaces. Based on our experimental XPS and ToF-SIMS results as well as former publications, we postulate that the chemisorption of the PPS-PEG on ITO involves direct sulfide-indium (or tin) interactions. When an ascending anodic electrical stimulus was applied to the surface of the modified samples, a gradual and steady polymer removal was observed, with complete loss of the polymeric monolayer at a potential of 2000 mV (referenced to Ag electrode). Anodic polarization did not result in oxidation of the thioether function of the PPS-PEG adlayers, indicating excellent oxidation resistance of PPS-PEG on ITO surfaces. This work is focused on exploiting electrical stimuli for the in situ surface modification under dynamic control.