Use of biochar-coated polypropylene fibers for carbon sequestration and physical improvement of mortar

Biochar is widely recognized as an effective material for sequestration of carbon dioxide. The possibility of using it as a coating material on polypropylene fibers to improve mechanical properties and permeability mortar is explored in this study. Effectiveness of two types of biochar - fresh biochar and biochar saturated with carbon dioxide prior to application as coating - on compressive and flexural strength, post-cracking behavior and permeability of mortar is studied. The biochar used was derived from mixed wood saw dust by pyrolysis at 300 °C. Experimental results show that application of fresh biochar coating offer significant improvement in compressive strength and flexural strength of mortar. Residual strength and post-cracking ductility of mortar with biochar coated fibers is found to be higher than control samples, although fresh biochar coating offers the best performance. Mortar with polypropylene fibers coated with fresh biochar shows higher impermeability, compared to reference samples and mortar with saturated biochar coated fibers. The findings suggest that biochar coating could be a potential solution to improve properties of fiber reinforced cementitious composites that also promotes waste recycling and carbon sequestration.