کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5437114 | 1509729 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A new test method to study the influence of pore pressure on fracture behaviour of concrete during heating
ترجمه فارسی عنوان
یک روش آزمایشی جدید برای مطالعه اثر نفوذ فشار منبر بر رفتار شکستگی بتن در طی گرمایش
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
درجه حرارت بالا، انفجار مواد منفجره، استحکام کششی، استرس حرارتی، فشار بخار،
ترجمه چکیده
رفتار شکستگی بتن در دمای بالا یکی از عواملی است که باعث تخریب انفجار می شود، یعنی خروج قطعه ها به علت افزایش فشار در منافذ و استرس ناشی از گرادیان حرارتی و بارهای خارجی. در این زمینه، یک راه اندازی ویژه آزمایشگاهی با هدف انجام ساده تست های تنش غیر مستقیم در سطوح مختلف فشار منفی پایدار طراحی شده است. یک نمونه مکعب بر روی دو چهره مخالف گرم می شود، در حالی که طرفهای جانبی مهر و موم شده و گرمای عایق هستند، به طوری که یک میدان مغناطیسی یکنواخت ترمو هیگرال را گذراندند. در آزمون تقسیم، شکست در امتداد هواپیما تقارن، که در آن هر دو دما و فشار با استفاده از یک پروب سفارشی نظارت می شود. نتایج نشان می دهد که فشار منفذ تاثیر بسزایی بر پاسخ مکانیکی بتن گرم است، هرچند سهم همزمان بار خارجی و فشار حرارت برای جلوگیری از انفجار مواد منفجره ضروری است.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Fracture behaviour of concrete at high temperature is one of the factors governing explosive spalling, namely the expulsion of chunks due to both pressure build-up in the pores and stress induced by thermal gradients and external loads. In this context, a special experimental setup has been developed aimed at performing simple indirect-tension tests under different levels of sustained pore pressure. A cubic specimen is heated on two opposite faces, whereas the lateral sides are sealed and thermally insulated, so as to instate a mono-dimensional thermo-hygral transient field. In the splitting test, fracture develops along the symmetry plane, where both temperature and pressure are monitored by means of a customized probe. The results show that pore pressure has a significant influence on the mechanical response of heated concrete, though the concurrent contribution of external load and thermal strain is required for triggering explosive spalling.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Cement and Concrete Research - Volume 94, April 2017, Pages 13-23
Journal: Cement and Concrete Research - Volume 94, April 2017, Pages 13-23
نویسندگان
Roberto Felicetti, Francesco Lo Monte, Pierre Pimienta,