کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5442559 | 1510763 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of laser parameters on the microstructure of bonding porcelain layer fused on titanium
ترجمه فارسی عنوان
اثر پارامترهای لیزر بر ریزساختار لایه چینی باند پیوند شده با تیتانیوم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
بیومارکرهای، ریز ساختار، تیتانیوم، پردازش لیزری، پختن
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
Bonding porcelain layer was fused on Ti surface by laser cladding process using a 400Â W pulse CO2 laser. The specimens were studied by field-emission scanning electron microscopy, X-ray diffraction and bonding tests. During the laser fusion process, the porcelain powders were heated by laser energy and melted on Ti to form a chemical bond with the substrate. When the laser scanning speed decreased, the sintering temperature and the extent of the oxidation of Ti surface increased accordingly. When the laser scanning speed is 12.5Â mm/s, the bonding porcelain layers were still incomplete sintered and there were some micro-cracks in the porcelain. When the laser scanning speed decreased to 7.5Â mm/s, vitrified bonding porcelain layers with few pores were synthesized on Ti.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optical Materials - Volume 71, September 2017, Pages 136-140
Journal: Optical Materials - Volume 71, September 2017, Pages 136-140
نویسندگان
Xiaoyuan Chen, Litong Guo, Xuemei Liu, Wei Feng, Baoe Li, Xueyu Tao, Yinghuai Qiang,