کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5443730 | 1510874 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tension/compression asymmetry in additive manufactured face centered cubic high entropy alloy
ترجمه فارسی عنوان
عدم تقارن تنش / فشرده سازی در آلیاژ آنتروپی باالیی مکعبی به صورت مرکب ساخته شده است
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژ آنتروپی بالا، دوقلو، سخت شدن کار، استرس برشی حل شده بحرانی برای دوزندگی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
The high entropy alloy, Al0.3CoCrFeNi, has been fabricated by direct laser fabrication and its deformation behaviour studied. This alloy exhibited significant tension/compression asymmetry in its work hardening rate and ductility. The exceptionally high work hardening in compression has been attributed to profuse mechanical twinning which has been exacerbated by a strong texture in the as-cast material. The tensile deformed material did not exhibit any mechanical twinning, deformed exclusively by slip, and therefore showed minimal work hardening and poor ductility. The critical resolved shear stress for twinning of the alloy was found to be approximately 240 MPa.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 129, 1 March 2017, Pages 30–34
Journal: Scripta Materialia - Volume 129, 1 March 2017, Pages 30–34