The Role of the Thermal Mass in nZEB with different Energy Systems

European and Italian standards establish high levels of energy performance of buildings that have to be designed considering their energy balance near zero. To achieve this goal, the reduction of energy demand, attainable by improving energy efficiency of the construction, and the use of renewable energy available both on site and off site are effective solutions to be applied. In particular, in buildings that use energy produced from renewable sources, due to their unstable and unpredictable nature, having the right strategy to compensate the variations is essential. A technical solution reevaluated as a consequence of passive design principles, is to provide an adequate thermal inertia in order to store energy when it is offered and to use it when the source is not available. In these cases, the ability of construction elements to retain heat becomes fundamental as they contribute to maintain internal comfort conditions. This paper aims to investigate how various types of heating and cooling systems, based on different modes of heat transfer, are able to interact differently with the thermal mass of the building, producing a different level of its activation. The investigation considers a case study used to carry out dynamic simulation by means of DesignBuilder which is a user interface of EnergyPlus. The model consists of a building with elementary geometry and a single thermal zone, delimited by walls with outside thermal insulation and a heat accumulation layer inside. The variation of the internal temperature by using different types of conditioning system is analyzed in order to individuate the technology that takes the greatest advantages from the thermal mass.