کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5451531 1513712 2017 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Microstructural Evolution and Service Performance of Cold-drawn Pure Aluminum Conductor Wires
ترجمه فارسی عنوان
تکامل میکرو سازمانی و عملکرد سیم کشی سیم آلومینیوم خالص کشیده شده
کلمات کلیدی
ترجمه چکیده
ریزپردازنده ها و عملکرد خدمات (خواص مکانیکی و الکتریکی) سیمهای هدایت الکتریکی خالص آلومینیوم تحت جوش های سرد مختلف مورد بررسی قرار گرفتند. نتایج نشان می دهد که ریزساختار سیم های آلومینیومی سرد در امتداد جهت شعاعی غیرمنتظره است، یعنی بافت در منطقه مرکز قوی 111 و کمترین ضریب 001 است، در حالی که در منطقه سطح از محور اولیه بافت به یک جزء <112> و در نهایت به یک مولفه قوی 111 تبدیل شد. کسر حجمی مرزهای دانه زاویه بالا در منطقه سطح بالاتر از منطقه مرکزی بود. فرایند رسم سرد باعث افزایش قدرت سیم آلومینیوم خالص شده و مقاومت الکتریکی قابل قبول را حفظ کرد. مکانیسم تقویت و تنوع هدایت الکتریکی سیم های آلومینیومی سرد توسط ارتباط با تکامل میکروارگانیسم مورد بحث قرار گرفته است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد شیمی مواد
چکیده انگلیسی
Microstructures and service performance (mechanical and electrical properties) of the commercially pure Al conductor wires subjected to different cold drawing strains were investigated. The results show that the microstructures of the cold-drawn Al wires along the radial direction were inhomogeneous, i.e. the texture in the center region was strong <111> and weak <001> components, while that in the surface region shifted from the initial cubic texture to a <112> component and finally developed into a strong <111> component. The volume fraction of the high angle grain boundaries in the surface region was higher than that in the center region. The cold-drawing process greatly enhanced the yield strength of the pure Al wires while retained the acceptable electrical resistivity. The strengthening mechanism and the variation of electrical conductivity of the cold-drawn Al wires are discussed through correlating with microstructure evolution.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Science & Technology - Volume 33, Issue 9, September 2017, Pages 1039-1043
نویسندگان
, , , , ,