کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5455280 | 1514636 | 2017 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Strain-rate effect on work-hardening behavior in β-type Ti-10Mo-1Fe alloy with TWIP effect
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The strain rate effect (2.8 à 10â5-2.8 à 10â1 sâ1) on the tensile properties and microstructure evolution of a β-type Ti-10Mo-1Fe (wt%) alloy has been investigated. With increasing strain rate, the yield strength increased, while the ultimate tensile strength, total elongation and uniform elongation decreased. It was found that deformation at a lower strain rate led to an enhanced work hardening rate (θ). This is reflected in the decreasing strain rate sensitivity of flow stress, m, with increasing strain. Strain rate sensitivity was positive at a smaller strain level (< 0.13), and decreased to a negative at a larger strain. The strain rate dependence of work-hardening behavior has been investigated and discussed in terms of the microstructure evolution, such as {332}<113> twins and dislocations. Electron Backscattered Diffraction (EBSD) and X-ray diffraction (XRD) analyses revealed lower increasing rates of {332}<113> twins and dislocation density at higher strain rates, which may be caused by adiabatic heating. This may lead to the reduced work-hardening rate on deformation at the higher strain rates.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 707, 7 November 2017, Pages 701-707
Journal: Materials Science and Engineering: A - Volume 707, 7 November 2017, Pages 701-707
نویسندگان
Xin Ji, Satoshi Emura, Xiaohua Min, Koichi Tsuchiya,