Thermomechanical fatigue behavior of annealed Cu-Cr-Zr-Ti alloy in argon atmosphere

Strain controlled thermomechanical fatigue (TMF) behavior of Cu-Cr-Zr-Ti alloy was studied in the temperature range of 375-525 °C in high purity argon atmosphere under both in-phase (IP) and out-of-phase (OP) loading. In the case of OP TMF tests, the material exhibited continuous hardening without any saturation of stress. On the other hand, it showed cyclic hardening for the first few cycles followed by saturation of stress in IP TMF tests. The material exhibited superior lives under OP TMF loading compared to that under IP TMF loading especially at lower strain amplitudes. This may be attributed to the fact that the material experienced peak tensile stress at lower temperatures in OP TMF tests, where the resistance to crack initiation is expected to be higher. Microstructural observations and fractographic studies indicated mixed mode of fracture involving Intergranular facets and transgranular cracking in both IP and OP TMF tests.