کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5455573 | 1514639 | 2017 | 26 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dynamic strain aging in DP steels at forming relevant strain rates and temperatures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Mechanical testing of dual phase (DP) steels at low strain rates (10â3 sâ1) have shown that they are susceptible to dynamic strain aging (DSA) between 100 °C-400 °C. During industrial forming processes at intermediate strain rates (1-102 sâ1), the local temperatures may rise to the DSA range due to deformation heating which may disturb the exceptional formability of these steels. In this study, two grades of DP steel (DP590 and DP800) are tested at thermomechanical conditions relevant to forming and the effects of DSA on the formability are established. Test results show that the DSA controls the deformation between 200 °C-300 °C through serrations in the stress-strain curves of both grades. With increasing strain rates (up to 1 sâ1) and temperatures, DSA intensifies and results in severe drops in uniform and total ductility with negative strain rate sensitivity, indicating poor formability at these conditions. A detailed analysis of the serrations coupled with dislocation density measurements by x-ray analysis suggests that the serrations can be linked to a periodic microstructural feature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 704, 17 September 2017, Pages 164-172
Journal: Materials Science and Engineering: A - Volume 704, 17 September 2017, Pages 164-172
نویسندگان
Berkay Bayramin, Caner ÅimÅir, Mert Efe,