کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5455816 | 1514641 | 2017 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Deformation structures and strengthening mechanisms in an Al-Cu alloy subjected to extensive cold rolling
ترجمه فارسی عنوان
ساختارهای تغییر شکل دهنده و مکانیسم های تقویت در یک آلیاژ آلومینیوم تحت سربار نورد گسترده است
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژهای آلومینیوم، پردازش حرارتی مکانیکی، سخت شدن جابجایی، مرز دانه ساز و کارهای تقویت،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The deformation structures, mechanical properties and strengthening mechanisms of a 2519 aluminum alloy subjected to cold rolling up to a total reduction of 80% (ε ~ 1.61) in the supersaturated solid solution condition were studied. The formation of cell structure and a one hundred-fold increase in lattice dislocation density up to â¼ 2.1 à 1015 mâ2 after a 40% reduction leads to increase in yield stress (ÏYS) and ultimate tensile strength (ÏUTS) from 135 to 453 MPa, from 350 to 503 MPa, respectively. The formation of fully lamellar structure and further increase in lattice dislocation up to Ïd ~ 5 à 1015 mâ2 take place at an 80% reduction. As a result, ÏYS and ÏUTS increase to 560 and 590 MPa, respectively. Yield stress at reductions ⥠40% are significantly higher than that in an AA2519T87 alloy. Subdivision of initial grains by lamellar boundaries due to deformation banding provide high efficiency of dislocation strengthening due to the accumulation of an extremely high density of lattice dislocations in supersaturated solid solution and retention of sufficient elongation-to-failure of 9% and 5% after reductions of 40% and 80%, respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 702, 15 August 2017, Pages 53-64
Journal: Materials Science and Engineering: A - Volume 702, 15 August 2017, Pages 53-64
نویسندگان
I. Zuiko, R. Kaibyshev,