کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5456065 | 1514649 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tune the mechanical properties of Ti-based metallic glass composites by additions of nitrogen
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Different amounts of nitrogen from 1000 to 14,000 wt ppm were added into the Ti48Zr20Nb12Cu5Be15 bulk metallic glass composites. Results show that addition of nitrogen can increase the yield strength of composites from 1400 to 2350 MPa due to the solid solution strengthening effect. The composites still owns certain plastic strain (above 10% when contains 14,000 ppm nitrogen) before fracture under compressive test. The reason is attribute to nitrogen shows to be a much weaker activator for the formation of brittle α-Ti phase as compared with oxygen, which make the β-Ti dendrite still softer than that of the glassy phase, thus can enhance the strength of the materials but do not deteriorate the plasticity too much. Our research show that nitrogen can be added into the Ti-based metallic glass composites in a very large range to effectively tune the suitable mechanical properties of Ti-based metallic glass composites, without worrying about the catastrophic failure in the process of deformation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 694, 10 May 2017, Pages 93-97
Journal: Materials Science and Engineering: A - Volume 694, 10 May 2017, Pages 93-97
نویسندگان
Liyuan Li, Jinshan Li, Jun Wang, Hongchao Kou,