کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5456493 | 1514654 | 2017 | 15 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A comparison between 2017A and 4047A aluminum alloys microstructure changes under thermal fatigue loading
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents a study of 2017A and 4047A aluminum alloys microstructure changes under thermal fatigue loading. Specimens were subjected to a cyclic thermal load. The thermal fatigue loading is ensured by applying repetitive heating and cooling cycles; with a temperature variation between 80 and 280 °C using a lab-made bench test. Only thermal loading was considered. No mechanical stress was applied during all tests. Change in mechanical properties of the tested materials was studied through hardness measurements, SEM micrographic observations and XRD analysis for different cycle numbers. For the two alloys, the results showed that the hardness decreases when the cycle number increases. This observed phenomenon is more important in the case of 2017A alloy. Micrographic observation and XRD analysis led to conclude that this hardness decrease is due to the dispersion and morphology changes of the hardening precipitates, for the 2017A alloy, and silicon particles dissolution in case of the 4047A alloy.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 689, 24 March 2017, Pages 96-102
Journal: Materials Science and Engineering: A - Volume 689, 24 March 2017, Pages 96-102
نویسندگان
Adel Belkharchouche, Achraf Boudiaf, Mohamed El Amine Belouchrani,