کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5466950 | 1398922 | 2017 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Cemented carbide tools in high speed gear hobbing applications
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Cemented carbide tools in high speed gear hobbing applications Cemented carbide tools in high speed gear hobbing applications](/preview/png/5466950.png)
چکیده انگلیسی
Gears in the modulus range between mn = 1 mm and mn = 4 mm are widely used in automotive gear boxes. To enable maximum productivity in gear hobbing cutting tools made of cemented tungsten carbide are used. Despite its ability the full potential of the substrate material is not applied in industry because of unknown process limits and wear mechanisms. To examine the mechanisms and to close down the lack of knowledge three different cases of gearings were thoroughly examined. The wear phenomena and tool life behaviour were inspected within the fly-tooth analogy test at different frame conditions, reaching cutting speeds up to 1000 m/min. To determine causal relations the process was also analysed by the means of interpenetration- and FEM-simulations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 66, Issue 1, 2017, Pages 117-120
Journal: CIRP Annals - Volume 66, Issue 1, 2017, Pages 117-120
نویسندگان
B. Karpuschewski, M. Beutner, M. Köchig, M. Wengler,