Fluid–solid coupling thermo-mechanical analysis of high power LED package during thermal shock testing

The virtual design by numerical simulation to model various accelerated reliability testing conditions is adopted to validate and improve the reliability of the high power LED package. In this study, the reliability of the high power LED package during thermal shock testing is investigated by fluid–solid coupling thermo-mechanical modeling by considering nonlinear time and temperature dependent material properties. Through fluid–solid coupling transient thermal transfer analysis, it is found that the maximum thermal gradient exceeds 75 K during the rapid cooling process and 91 K during the rapid heating process of the thermal shock testing which is ignored in the traditional isothermal assumption. The calculation results indicate that the equivalent plastic strain range of the bonding wire within the LED package with consideration of the temperature gradient is much higher than that with the isothermal assumption. The assumption of the isothermal condition is not appropriate which will lead to overestimation of the predicted lifetime. The viscoelastic behaviors of the silicone have significant influences on the lifetime prediction of the bonding wire and silicone with low elastic modulus and coefficient of thermal expansion (CTE) can significantly enhance the reliability of the bonding wire under the thermal shock loading. The results in this study could provide a guideline on design for reliability in the high power LED packaging.