کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5491217 1524797 2017 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fabrication and properties of strip casting 4.5 wt% Si steel thin sheet
موضوعات مرتبط
مهندسی و علوم پایه فیزیک و نجوم فیزیک ماده چگال
پیش نمایش صفحه اول مقاله
Fabrication and properties of strip casting 4.5 wt% Si steel thin sheet
چکیده انگلیسی
Three 4.5 wt% Si steel thin sheets with different thicknesses were efficiently fabricated by twin-roll strip casting, warm rolling and cold rolling followed by final annealing. A comprehensive investigation from the workability of the as-cast strip to the magnetic property of the produces was performed to illustrate the superiority of the new materials. The results show that the as-cast strip, which has a much lower Vickers hardness than that of the 6.5 wt% Si steel, is suitable for rolling processing. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies confirm that no ordering phase exists in the as-cast strip. The cold-rolled thin sheets exhibit good surface quality without edge cracks. Furthermore, all the three 4.5 wt% Si steel thin sheets possess relative strong <100>//ND texture and present high magnetic inductions and low iron losses after finial annealing.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Magnetism and Magnetic Materials - Volume 424, 15 February 2017, Pages 64-68
نویسندگان
, , , , , , , ,