Failure modes and effects analysis for high-power GaN-based light-emitting diodes package technology

In this study, nondestructive test is developed to analyze the structure failure of LED package. The relationship between thermal resistance analysis and LED package failure structure is build with T3Ster thermal transient tester and scanning electron microscope (SEM). The failure LED device with defect in the attaching layer and gap between LED chip and copper are designed advisedly. The failure factors of LED package have been measured with thermal resistance analysis and SEM cross-section images. The thermal dissipation performance of LED with defect in the attaching layer is indicated by thermal resistance analysis combined with SEM cross-section images. The blister in attaching layer results in 4.4 K/W additional thermal resistance. The gap between LED chip and copper also makes high additional thermal resistance with 8.6 K/W. Different failures of LED packages are indicated obviously using thermal transfer analysis. The LED package failure structure such as interface defect between solder and cup-shaped copper is able to forecast without destructive measurement.