NOx selective catalytic reduction at high temperatures with mixed oxides derived from layered double hydroxides

Mixed oxides derived from layered double hydroxides (LDHs) have been investigated as potential catalysts for the NOx removal at high temperatures. The best results were obtained with Co–Al mixed oxides derived from LDHs that are active at 750 °C in the presence of oxygen and water. These catalysts could reduce or/and decompose the NOx formed in the dense phase of the FCC regenerator, being deactivated at oxygen concentrations higher than 1.5%. Nevertheless this deactivation is not permanent and they would be regenerated after reduction with hydrogen at 530 °C. The influence of the layered double hydroxides (LDHs) preparation method on the catalyst activity was studied, observing that the activity of the catalyst depends on its chemical composition but it does not depend on the initial LDHs crystallinity, obtaining similar results independently of the synthesis method.

Figure optionsDownload high-quality image (89 K)Download as PowerPoint slideHighlights
► Co–Al mixed oxides derived from LDHs are active catalysts for the NOx SCR at 750 °C.
► They are active in presence of water and with an oxygen content up to 1.5%.
► Its activity does not depend on the LDH preparation but in its chemical composition.
► They can be used as additives for the NO control in the FCC regenerator.