The effects of urea modification and heat treatment on the process of NO2 removal by wood-based activated carbon

The removal of NO2 on urea-modified and heat-treated wood-based activated carbons was studied. From the obtained results it was found that these modifications, especially when done at 950 °C, have a positive effect on NO2 adsorption and on the retention of NO (the product of NO2 reduction by carbon). The presence of moisture in the system enhances the removal of NO2 but negatively affects the retention of NO. It is possible that the formation of active centers on the carbon surface and some increase in the volume of supermicropores during the high temperature treatment play a significant role in these removal processes. The surface of the carbons was analyzed in terms of the pKapKa distributions. The qualitative and quantitative analyses of the NO2 adsorption products were carried out by means of FTIR and TA techniques, respectively. The main products found on the carbon surface were the NO3 and NO2 species.

The NO2 adsorption and the retention of NO (product of NO2 reduction by carbon) were studied on urea-modified and heat treated activated carbon samples in dry and moist air.Figure optionsDownload as PowerPoint slide