Coagulation performance and floc characteristics of polytitanium tetrachloride and titanium tetrachloride compared with ferric chloride for coal mining wastewater treatment

• Ti-based coagulants were compared with FeCl3 for coal mining wastewater treatment.
• PTC coagulant achieved the highest turbidity, UV254 and multivalent metal removal.
• PTC showed the fastest floc growth rate and also the largest floc sizes.
• Sweep coagulation and adsorption were the major mechanisms during PTC coagulation.

The production and discharge of large volumes of wastewater during coal mining activities are one of the major environmental issues in Australia. Therefore, it is crucial to develop and optimise effective treatment processes for the safe disposal of coal mining wastewater (CMWW). In this study, we investigated the performance of a recently developed polytitanium tetrachloride (PTC) coagulant and compared with the performance of titanium tetrachloride (TiCl4) and the commonly used ferric chloride (FeCl3) coagulant for the treatment of CMWW from one of the coal mining sites in Australia. The use of Ti-based coagulants is particularly attractive for the CMWW treatment due to the advantage of being able to recycle the sludge to produce functional titanium dioxide (TiO2) photocatalyst; unlike the flocs formed using conventional coagulants, which need to be disposed in landfill sites. The results showed that both PTC and TiCl4 performed better than FeCl3 in terms of turbidity, UV254 and inorganic compounds (e.g. aluminium, copper or zinc) removal, however, PTC performed poorly in terms of dissolved organic carbon removal (i.e. less than 10%). While charge neutralisation and bridging adsorption were the main coagulation mechanisms identified for TiCl4 treatment; sweep coagulation and bridging adsorption seemed to play a more important role for both PTC and FeCl3 treatments. The flocs formed by PTC coagulation achieved the largest floc size of around 900 μm with the highest floc growth rate. Both Ti-based coagulants (i.e., PTC and TiCl4) showed higher strength factor than FeCl3, while TiCl4 coagulant yielded the flocs with the highest recovery factor. This study indicates that Ti-based coagulants are effective and promising coagulants for the treatment of CMWW.

Figure optionsDownload as PowerPoint slide