کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
653061 | 1457491 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Optimal tip clearance in the laminar forced convection heat transfer of a finned plate in a square duct
ترجمه فارسی عنوان
ترمیم نهایی نقطه مطلوب در انتقال گرمای انتقال حرارتی ورق گالوانیزه در کانال مربعی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فین مجرای میدان، پاکسازی نکته، کنسانتره اجباری، انتقال گرما، تقلید، آزمایشی محاسبه عددی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A joint experimental and numerical investigation of laminar forced convection heat transfer of a finned plate in a square duct is reported. The heat transfer rates were measured for fixed fin heights, fin thicknesses, and base-plate geometries, with systematically varied fin spacing, tip clearance, Prandtl number and Reynolds number. The optimal tip clearances were identified, which maximized the total heat transfer. The total heat transfer rate at the optimal tip clearance was maximum 33% higher than that at the largest tip clearance. It decreased as the Prandtl number increased and as the Reynolds number increased. The dependence of the heat transfer rate on the tip clearance weakened as the fin spacing increased.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Communications in Heat and Mass Transfer - Volume 63, April 2015, Pages 73-81
Journal: International Communications in Heat and Mass Transfer - Volume 63, April 2015, Pages 73-81
نویسندگان
Hae-Kyun Park, Bum-Jin Chung,