Ink dating, part I: Statistical distribution of selected ageing parameters in a ballpoint inks reference population

The development of ink dating methods requires an important amount of work in order to be reliably applicable in practice. Major tasks include the definition of ageing parameters to monitor ink ageing. An adequate parameter should ideally fulfil the following criteria: it should evolve as a function of time in a monotonic way, be measurable in a majority of ink entries, be as accurate and reproducible as possible, and finally it should not be influenced too much by transfer and storage conditions. This work aimed at evaluating the potential of seven ageing parameters for ink dating purposes: the phenoxyethanol quantity, relative peak areas (RPA), three solvent loss ratios (R%, R%*, NR%) and two solvent loss parameters (RNORM, NRNORM). These were calculated over approximately one year for 25 inks selected from a large database to represent different ageing behaviours. Ink entries were analysed using liquid extraction followed by GC/MS analysis. Results showed that natural ageing parameters (NR% and NRNORM) were not suitable ageing parameters for ink entries older than a few weeks. RPA used other compounds present in ink formulations in combination to PE in order to normalise the results. However, it presented particular difficulties as they could not be defined for all inks and were thus applicable only for 64% of the studied inks. Finally, the PE quantity, R% and RNORM allowed to follow the ageing of the selected inks over the whole time frame and were identified as the most promising. These were thus selected to test three different interpretation models in the second part of this article. The possibilities and limitations of ink dating methods will be discussed in a legal perspective.