کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6589325 | 456839 | 2016 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
CFD geometrical optimization to improve mixing performance of axial mixer
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Although various axial static mixers have been proposed, their commercialization have been hindered by their high pressure drop characteristic and the limited operating conditions where a wide frequency range of input disturbances cannot be filtered. The static “Time-Difference-Type Mixer (TDM)” is a new practical axial mixer that effectively reduces the intermittent variation of the mixture concentration. In the present study, the TDM was modified to decrease the pressure drop and smoothen the outlet concentration profile. The geometry of the element tip was modified based on the results of CFD simulation that were successfully validated by the corresponding experiments, with the purpose of reducing the flow resistance. A decrease in the pressure drop of nearly 40% was thus achieved. The concentration profile at the outlet was also substantially smoothened using an arrangement of the branch paths of the mixer that reduced the differences among the arrival times of the mixture through increased upstream spacing of the branch paths. The performance of the TDM was sufficiently optimized to make it commercially viable.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering Science - Volume 144, 22 April 2016, Pages 144-152
Journal: Chemical Engineering Science - Volume 144, 22 April 2016, Pages 144-152
نویسندگان
Toshihiro Hanada, Kenji Kuroda, Koji Takahashi,