Dimensional analysis of thermal stratification in a suppression pool

Due to complexity of direct contact condensation (DCC), it is difficult to predict the thermal hydraulic phenomenon in a suppression pool (SP) of LWRs. Especially, the momentum, induced at condensation interfaces, depends on several interrelated parameters such as the steam mass flux, subcooling, and the diameter of the injection nozzle. Complicated interaction of those parameters creates difficulties in developing a comprehensive analytical model, which applicable to various conditions. To investigate the criteria of thermal stratification created by DCC, experiments were performed using a downsized suppression pool. Time resolved temperatures were acquired by vertically aligned thermocouples. Additionally, steam bubbles were visualized by a high speed camera in order to examine bubble shapes according to the mass flux and subcooling. Both steam bubble frequency and amplitude were analyzed for different DCC regimes. Finally, Richardson number was chosen as a suitable parameter for the dimensional analysis of experimental results. Corresponding velocity at far field in synthetic jet theory was employed to calculate Richardson number. The criteria for the occurrence of the thermal stratification were clearly determined according to the Richardson number.