Liquid flow in a simplex swirl nozzle

• Flow in a swirl nozzle is studied theoretically, numerically, and experimentally.
• The effect of geometrical and inflow conditions on nozzle performance is studied.
• The condition in which an air core is formed is obtained theoretically.
• The current analysis provides better criteria for the design of swirl nozzles.

Pressure-swirl nozzles are widely used in applications such as combustion, painting, air-conditioning, and fire suppression. Understanding the effects of nozzle geometry and inlet flow conditions on liquid film thickness, discharge coefficient and spray angle is very important in nozzle design. The nozzle-internal flow is two-phase with a secondary flow which makes its detailed analysis rather complex. In the current work, the flow field inside a pressure-swirl nozzle is studied theoretically. Using the integral momentum method, the growth of the boundary layer from the nozzle entry to the orifice exit is investigated and the velocity through the boundary layer and the main body of the swirling liquid is calculated. A numerical modeling and a series of experiments have also been performed to validate the theoretical results. The effect of various geometrical parameters is studied and results are compared for viscous and inviscid cases. In addition, the condition in which the centrifugal force of the swirling flow overcomes the viscous force and induces an air core is predicted. The theoretical analysis discussed in this paper provides better criteria for the design and the performance analysis of nozzles.