کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6686773 | 501868 | 2015 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Parameter analysis and optimal design for two-stage thermoelectric cooler
ترجمه فارسی عنوان
تجزیه و تحلیل پارامتر و طراحی مطلوب برای دو مرحله ی کولر ترموالکتریک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
کولر ترموالکتریک، دو مرحله ای ظرفیت خنک کننده، ضریب عملکرد، بهینه سازی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
مهندسی انرژی و فناوری های برق
چکیده انگلیسی
The objective of this work is to examine the parameter sensitivity and optimize the cooling performance of two-stage thermoelectric cooler (TEC). Firstly, a multiphysics model is used to investigate the effects of geometry parameters and applied currents on the performance of a two-stage TEC. Specially, cross-sectional area ratio of the p-type leg to the leg pair Ï and height ratio of the cold stage leg to the two stage legs δ are explored, which have never been investigated in previous studies. Secondly, a simplified conjugated-gradient method is coupled into the multiphysics model to optimize the four key geometric parameters and two applied currents supplied to hold and cold stages, for seeking the maximum cooling capacity. The results of individual parameter analysis mainly show that the optimal Ï does not depend on the geometric structure and applied currents of TEC, while it is only determined by the p-type and n-type semiconductor materials. The height ratio δ always plays the role to adjust the temperature between the cold and hot stages, resulting in that the both stages could operate at the proper temperature differences matching with their respective applied current. The optimization results show that the maximum cooling capacity Qc,c at ÎT = 0, 20, 40, and 60 K is enhanced by 19.62%, 21.30%, 25.49%, and 43.83%, respectively, as compared with the initial design. When ÎT increases from 0 K to 40 K, the change for each parameter in the optimal set is not larger than 1.8%, indicating that once the optimal design is obtained at a specific ÎT, it can be safely used at any other ÎT.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Energy - Volume 154, 15 September 2015, Pages 1-12
Journal: Applied Energy - Volume 154, 15 September 2015, Pages 1-12
نویسندگان
Tian-Hu Wang, Qiu-Hong Wang, Chuan Leng, Xiao-Dong Wang,