The effects of urban driving conditions on the operating characteristics of conventional and hybrid electric city buses

The route elevation profile and the frequency of stop-and-go operations of the buses were found to have dramatic impacts on the braking and traction energies of the buses. The declining profile of the Campus-Return route provided an excellent opportunity for energy recovery by the regenerative braking system of the HEB. However, owing to the limits on the capacities and efficiencies of the hybrid drive train components and the Ucap, the bus braking energies were not recovered completely. Braking energies as high as 2.2 kW h per micro-trip were observed, but less than 1 kW h of braking energy per micro-trip was converted to electricity by the M/G; the rest of the braking energy was wasted in frictional braking. The maximum energy recovered and stored in the Ucap per micro-trip was 0.5 kW h, but the amount of energy recovered and stored per micro-trip was typically less than 0.2 kW h for the entire route. The cumulative braking energy recovered and stored in the Ucap for the Campus-Return route was 52% of the available brake energy, which was 13.02 kW h. Consequently, the round-trip efficiency of the regenerative braking system, between the wheels and Ucap, was determined to be 27%. Finally, although the brake engine energy (BEE) of the CB was 1.18 times higher than its positive traction energy (PTE), the BEE of the HEB was only 1.07 times higher than its PTE. In fact, it is normal to expect the BEE to be higher than the PTE owing to power train losses, but the energy recovered by the regenerative braking system was found to cover most of the power train losses and even improve the energy efficiency of the HEB.