کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6705415 | 502902 | 2016 | 34 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of plies' orientations on the stress distribution in adhesively bonded laminate composite joints subjected to impact loadings
ترجمه فارسی عنوان
تأثیر جهت گیری های ورق بر توزیع استرس در اتصالات کامپوزیت لمینیت چسبیده باند تحت بارهای ضربه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
جفت دو لبه، پیوند های مشابه، ضربه، کامپوزیت ورقه ورقه، تجزیه و تحلیل عناصر محدود غلظت استرس،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
Adhesive bonding of structural composite structures is increasingly used in several engineering applications. The mechanical behavior of adhesively-bonded composite joints is highly influenced by the reinforcements' orientations. In this work, the influence of composite laminates' orientation, on the peel and shear stresses in the adhesive layer of composite double lap joints subjected to in-plane impact loading, was investigated. To this end, three-dimensional finite elements analysis was undertaken. First, four laminate orientations/configurations were considered: 0°, ±45°, 90°, 0/90°. Second, configurations were chosen in a manner to explore the influence of plies' positions. Starting from the 0°, one or two ply(ies) are replaced by one or two ply(ies), respectively, which are oriented in 90° or ±45° directions. It was found that the profile of the substrates and adhesive stresses variation along the axial/longitudinal direction is not affected by the substrates orientations. However, the highest adhesive stresses are achieved when fibers are all or mostly oriented along the loading/axial direction [0°] and the lowest adhesive stresses are obtained when the fibers are oriented perpendicular to the applied load [90°]. It is then concluded that the adhesive stresses increase as the substrates longitudinal stiffness increases. It is also concluded that the stress in the adhesive layer is mostly influenced by the closest laminate plies and almost not affected by the far plies.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 152, 15 September 2016, Pages 654-664
Journal: Composite Structures - Volume 152, 15 September 2016, Pages 654-664
نویسندگان
Rachad Hazimeh, Ramzi Othman, Khaled Khalil, Georges Challita,