کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6706796 | 502927 | 2015 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of through-thickness reinforcement aspect ratio on mode I delamination fracture resistance
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Interlaminar reinforcement may be achieved in a composite laminate by the insertion and bonding of stiff rods through the thickness. It is experimentally shown in the paper that increased aspect ratio (AR) of through-thickness rods significantly elevates mode I maximum delamination fracture resistance of a laminate. This effect is explained through the analysis of rod/laminate interfacial stress transfer. Lower interfacial shear stresses occur for interlaminar rods of greater AR for equivalent bridging traction against opening delamination. Thereby, a larger AR allows the rod to develop a greater closure force prior to the rod debonding from the laminate. Further, these results show that this approach for interlaminar reinforcement is best applied to laminates of thickness-to-rod diameter ratio sufficient to allow for insertion of high aspect ratio reinforcement rods.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 125, July 2015, Pages 13-22
Journal: Composite Structures - Volume 125, July 2015, Pages 13-22
نویسندگان
Sergii G. Kravchenko, Oleksandr G. Kravchenko, Leif A. Carlsson, R. Byron Pipes,