کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6707530 | 502935 | 2014 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Static strength of metal-composite joints with penetrative reinforcement
ترجمه فارسی عنوان
استحکام استاتیک اتصالات فلزی - کامپوزیت با تقویت نفوذ پذیر
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
اتصالات چسبنده، گسیختگی، ویژگی های مکانیکی، تست غیر مخرب، جوشکاری / اتصال،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
A novel metal-composite joining technology is presented. Hybrid penetrative reinforcement (HYPER) uses small pins, protruding from the metallic part, to form an integrated assembly with high toughness. Different pin geometries and surface treatments are mechanically tested and compared. An ultrasonic, non-destructive inspection method is used to determine the failure modes. It is shown that the pins delay the initiation of failure, slow the propagation of damage and increase the ultimate strength by 6.5 times compared to an unpinned benchmark joint. The mean elongation at maximum load can be increased by over 400% and the energy absorbed can be more than 80 times higher, with reinforcement. Surface “nano-structuring” is also found to improve titanium-composite adhesion strength and consistency. Subsequently, a 25% higher load is required to initiate failure.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 118, December 2014, Pages 250-256
Journal: Composite Structures - Volume 118, December 2014, Pages 250-256
نویسندگان
P.N. Parkes, R. Butler, J. Meyer, A. de Oliveira,