Solids flow diagram of a CFB riser using Geldart B-type powders

Riser operating modes are vital to designing a circulating fluidized bed (CFB) reactor for a required process of either a gas–solid or a gas–catalytic nature. Different operating modes provide different solids’ residence times and mixing behaviors, which define the reactions’ efficiency and yield. The literature demonstrates distinct operating modes resulting from observed differences in slip factors and the range of particle velocities and their associated residence time distribution. The present research uses positron emission particle tracking (PEPT) in a riser of B-type bed material to determine the different operating modes by measuring (i) particle velocities and residence time distribution, (ii) population densities of these particles in the cross-sectional area of the riser, and (iii) solids flow pattern at the bottom of the riser. Data treatment defines four distinct solids hold-up regimes in the riser and proposes a “phase diagram” depicting the existence of the different operating modes (dilute, dense, core-annulus and combined) as a function of the superficial gas velocity and solids circulation flux in the riser. The delineated regimes have good agreement with available literature data and known industrial operations. Comparison with literature data for risers using A-type powders is also fair. The diagram enables CFB designers to better delineate operating characteristics.

The riser operating modes follow four distinct solids hold-up regimes in the riser. Positron emission particle tracking defines these modes. Results define a phase diagram, in good agreement with available literature data and with known industrial operations of CFB risers.Figure optionsDownload as PowerPoint slide