کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6729492 1428932 2018 27 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
New perspectives in solid desiccant cooling for hot and humid regions
ترجمه فارسی عنوان
دیدگاه های جدید در خنک کننده خنک کننده جامد برای مناطق گرم و مرطوب
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
In this study, new perspectives in the desiccant cooling system (DCS) have been derived, which are helpful to achieve an energy-efficient design through the heat-driven cooling equipment. Under the circumstances of handling the ventilation load in the hot and humid regions, it was found that the DCS could provide tangible cooling capacity both with and without the regeneration heat. In the absence of regeneration heat, the DCS was preferable to have solid desiccant wheel operated at a high rotational speed together with a sensible heat exchanger. In the presence of regeneration heat, the DCS should operate the desiccant wheel at a low speed, with a sensible heat exchanger and a regenerative air evaporative cooler. The coefficient of performance was found decreased with the regeneration temperature in such scenario. It was also identified that the regeneration temperature should be higher than 60 °C, otherwise the DCS would function even worse than that without regeneration heat. This imposed a limitation of low-grade renewable or waste heat sources for DCS application. In fact, it would be more energy-efficient if the low-grade regeneration heat was used to drive an adsorption chiller while the DCS was simply employed as an energy recovery unit.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy and Buildings - Volume 158, 1 January 2018, Pages 1152-1160
نویسندگان
, ,