Thermal study of phenol–formaldehyde resin modified with cashew nut shell liquid

In this study, an experimental phenol–formaldehyde resin with 20% phenol replacement by cashew nut shell liquid (CNSL) was studied and compared with a conventional phenol–formaldehyde resin synthesized totally from petrochemical raw materials. The resins were characterized with standard lab analysis for their physicochemical specifications, while their thermal properties were studied with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). For comparison reasons pure CNSL and wood were also included in the TGA study. A DSC study conducted both for the neat resins and the system wood–resin as to examine the effect of wood on the curing performance of the resins in the real time conditions of their usage at the wood-based panels industry.The adhesion strength of these resins was investigated by their application in plywood production. The plywood panels were tested for their shear strength and wood failure performance while their free formaldehyde emissions were determined with the desiccator method. It was proved that although the neat CNSL modified PF resin (PCF) cures at longer time and higher temperature than a conventional PF resin, wood affects it more significantly, resulting in the evening of their curing performance. This is a novel finding that manifests the possibility of replacing a convention PF resin by a CNSL modified one in the plywood production, without changing any of their production conditions and with improvement to their overall properties.