کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6751068 | 1430688 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Optimization and control of bending distortion of submerged arc welding I-beams
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this study, the bending distortion of I-beams fabricated from steel sheets using submerged arc welding (SAW) is investigated. Bending distortion occurs due to non-uniform distribution of heat generated during welding. It is believed that distortion can be minimized by suitable selection of the input parameters of the welding process. In order to optimize the welding parameters to minimize the bending distortion, a direct experiment is conducted at a manufacturing plant fabricating I-beams. The study employs methods of design of experiments (DoE) and analysis of variance (ANOVA) to detect the significant parameters affecting the response “the bending distortion”. Welding arc voltage, wire feed speed, and welding travel speed are examined by performing three-level full factorial design in three blocks. Based on the specifications of the I-beam (web and flange dimensions), the objective is to properly select the SAW machine's parameters that could minimize the bending distortion.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 142, March 2018, Pages 78-85
Journal: Journal of Constructional Steel Research - Volume 142, March 2018, Pages 78-85
نویسندگان
Mohammed T. Hayajneh, Abdullah F. Al-Dwairi, Sinan F. Obeidat,