کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6756884 | 1431090 | 2018 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The impact of a passive tuned mass damper on offshore single-blade installation
ترجمه فارسی عنوان
تأثیر مخزن انبساطی غیر فعال غیرفعال در نصب یک تیغه دریایی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نصب تک تیغه، کمپرسورهای توده ای، ارتعاش تک نفره، حرکت هاب، باد و امواج، بیرون رفتن
ترجمه چکیده
نصب یک تیغه یک روش مناسب برای نصب تیغه در توربین های بادی بزرگ است. برای تاسیسات تک تیغه در توربین های بادی دریایی نوعی تک فاز، یک واگن بالایی درگیر است و هر تیغه با هاب در بالای برج مونتاژ می شود. قبل از مرحله اصلاح، ریشه تیغه و نایسل در برج بالا تجربه حرکات نسبی. حرکات ریش تراش ها توسط بارهای باد بوجود می آیند و حرکات ناخن به علت ارتعاش رزونانس ساختار حمایت تک نفره تحت بارگذاری موج است. برای رفع حرکات نسبی و تسهیل فرایند تراز کردن، می توان مخازن انبساط انبساطی غیرفعال خارجی را بر روی سازه های حمایت تک تک نصب کرد. در این مقاله، پتانسیل کاربرد مخازن توده ای تنظیم شده در نصب تک تیغ مورد بررسی قرار می گیرد. شبیه سازی چندگانه در شرایط باد و امواج کلاویه ای انجام شد و حرکت نسبی بین ریشه تیغه و هاب تجزیه و تحلیل شد. مشخص شد که هنگامی که یک دمپر منفعل مطلوب تنظیم شده برای ساختار تک قطبی در نظر گرفته شده، کاهش شعاع حرکت بحرانی می تواند تا 30٪ افزایش یابد.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
Single-blade installation is a method suitable for the installation of blades on large wind turbines. For single-blade installations on offshore monopile-type wind turbines, a jack-up vessel is often involved, and each blade is mated with the hub at the tower top. Prior to the alignment phase, the blade root and the nacelle at the tower top experience relative motions. The blade-root motions are induced by the wind loads, and the nacelle motions are due to the resonant vibrations of the monopile support structure under wave loading. To alleviate the relative motions and to facilitate the alignment process, external passive tuned mass dampers can be installed on the monopile support structures. This work investigates the application potential of tuned mass dampers in single-blade installation. Multibody simulations were conducted under collinear wind and waves conditions, and the relative motions between the blade-root and the hub were analysed. It was found that when an optimally tuned passive damper is considered for the monopile structure, the reduction in the critical motion radius can reach up to 30%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Wind Engineering and Industrial Aerodynamics - Volume 176, May 2018, Pages 65-77
Journal: Journal of Wind Engineering and Industrial Aerodynamics - Volume 176, May 2018, Pages 65-77
نویسندگان
Zhiyu Jiang,