کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6765906 512441 2016 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Gas turbine steam injection and combined power cycles using fog inlet cooling and biomass fuel: A thermodynamic assessment
ترجمه فارسی عنوان
تزریق بخار توربین گاز و چرخه های قدرت ترکیبی با استفاده از خنک کننده توربین ورودی و سوخت زیست توده: ارزیابی ترمودینامیکی
کلمات کلیدی
انرژی، اگزرژی، تزریق بخار، چرخه ترکیبی کولر تورم، زیست توده،
ترجمه چکیده
نتایج حاصل از تجزیه و تحلیل انرژی و اکسرژی از دو دوره ی تزریق بخار زیست توده و چرخه های قدرت ترکیبی گزارش شده است. خنک کننده مه، تزریق بخار و اضافه کردن چرخه توربین بخار به چرخه های توربین گاز می تواند عملکرد سیستم های تولید برق را افزایش دهد. حتی با ارزش حرارت پایین تر، زیست توده می تواند جایگزین سوخت های فسیلی شود. عملکرد چرخه ها تحت شرایط مشابه ارزیابی می شود. ارزیابی ها نشان می دهد که چرخه ترکیبی دارای کارایی بالاتری نسبت به مقادیر کم فشار کمپرسور است، اما کارخانه تزریق بخار در مقادیر نسبت فشار بالاتر سودمند است. کارخانه تزریق بخار دارای قدرت خالص بیشتری در شرایط مشابه است، در حالیکه میزان تلفات اضافی برای چرخه ترکیبی در تمام مقادیر فشار بیشتر است. اما نرخ تخریب اگزرژی برای چرخه تزریق بخار در نسبت فشار کم کمپرسور و برای چرخه ترکیبی با نسبت فشار بالاتر بالاتر است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
The results of energy and exergy analyses of two biomass integrated steam injection cycles and combined power cycles are reported. Fog cooling, steam injection and adding steam turbine cycles to gas turbine cycles can enhance the performance of power generation systems. Even with its lower heat value, biomass can be substituted for fossil fuels. The performances of the cycles are assessed under the same conditions. The assessments show that the combined cycle has a higher efficiency at lower values of compressor pressure ratio but the steam injection plant is advantageous at higher pressure ratio values. The steam injection plant has a higher net power under the same conditions, while the exergy loss rate is higher for the combined cycle at all pressure ratios. But the exergy destruction rate is higher for the steam injection cycle at lower compressor pressure ratios, and for the combined cycle at higher pressure ratios.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Renewable Energy - Volume 92, July 2016, Pages 95-103
نویسندگان
, , , , ,