کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6766088 512441 2016 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Three-dimensional experiment and numerical simulation of the discharge performance of sluice passageway for tidal power plant
ترجمه فارسی عنوان
آزمایش سه بعدی و شبیه سازی عددی عملکرد تخلیه عبور شونده برای نیروگاه جزر و مدی
کلمات کلیدی
نیروگاه جزر و مدی، بارگیری، گذرگاه شکاف، عملکرد تخلیه، ضریب تخلیه،
ترجمه چکیده
در این مطالعه، عملکرد تخلیه عبور شونده نیروگاه های جزر و مدی بر اساس آزمایش های انجام شده در یک کانال باز مسطح و شبیه سازی های عددی سه بعدی مورد بررسی قرار گرفت. با انجام آزمایشات در یک کانال مسطح، می توان میدان جریان سه بعدی در اطراف گذرگاه های شبیه به شرایط میدان را بازیابی کرد. ظرفیت تخلیه جاده در شرایط مختلف جریان با پنج باطری کانال مختلف تخمین زده شد. تخمین ضریب تخلیه معمولا از 1.3 تا 1.45 متغیر است که به طور معنی داری کمتر از مقادیر حاصل از مطالعه قبلی بر اساس آزمایش دو بعدی است. علاوه بر این، نتایج تجربی نشان داد که تفاوت قابل توجهی در ضریب تخلیه در میان موارد آزمون وجود دارد، و نشان دهنده تاثیر ظاهری توپوگرافی بستر کانال بر عملکرد تخلیه است. بر اساس یک مطالعه پارامتری فشرده که با استفاده از شبیه سازی های عددی انجام شده است، برای رسیدن به حداکثر ظرفیت تخلیه ی عبور شل، یک پیکربندی بهینه از عرض، شیب و طول انتهایی بخش پیشانی پیشنهاد شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
In this study, the discharge performance of the sluice passageway of tidal power plants was investigated based on the experiments conducted in a planar open channel and three-dimensional numerical simulations. By conducting the experiments in a planar channel, it was possible to reproduce the three-dimensional flow field around the sluice passageways similar to the field condition. The discharge capability of the passageway was estimated under various flow conditions with five different channel bathymetries. The estimates of the discharge coefficient generally ranged from 1.3 to 1.45, which are significantly smaller than the values obtained from the previous study based on the two-dimensional experiment. In addition, the experimental results showed a considerable difference in the discharge coefficient among the test cases, demonstrating an apparent influence of channel bed topography on the discharge performance. Based on an intensive parametric study carried out using the numerical simulations, an optimal configuration of the width, slope, and bottom length of the apron section was suggested for maximizing the discharge capability of the sluice passageway.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Renewable Energy - Volume 92, July 2016, Pages 462-473
نویسندگان
, , ,