کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6859356 | 1438701 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Technique for pre-compliance testing of phasor measurement units
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی کامپیوتر
هوش مصنوعی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper introduces a technique for 'pre-compliance' testing of Phasor Measurement Units (PMUs) against the dynamic requirements of the IEEE C37.118.1-2014 standard, which include dynamic and steady-state test scenarios. The tests described are a necessary, but not complete, requirement for passing the IEEE standard and quickly highlight shortcomings in PMU operation during dynamic conditions. The pre-compliance test presented in this paper only requires typical relay test equipment, with little requirement for significant temporal accuracy when initiating waveform test files. The compliance test is intended to allow PMU owners to assess a device's performance before considering its use in monitoring dynamic performance. Failure of these tests can indicate the need to recalibrate or replace the PMU or find another vendor. The described method is applied to the voltage inputs of a typical commercial PMU and the results presented. The process for the creation of test waveforms is described, along with the data analysis technique used. The test waveforms and analysis source code are made available under open source licenses.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Electrical Power & Energy Systems - Volume 99, July 2018, Pages 323-330
Journal: International Journal of Electrical Power & Energy Systems - Volume 99, July 2018, Pages 323-330
نویسندگان
Paul V. Brogan, David M. Laverty, Xiaodong Zhao, John Hastings, D. John Morrow, Luigi Vanfretti,