The effect of internal impellers on mixing in an electrochemical reactor with rotating rings electrodes

An electrochemical reactor with rotating electrodes has been used to to remove pollutants from aqueous media. Poor mixing and passivation of electrodes surface have been identified as the major drawbacks for the operation of this type of reactors because they adversely affect the critical reactions that take place in the liquid bulk. In this work, three different reactor configurations are proposed and their performance on reactor mixing time and process costs is evaluated. CFD simulations, based on previously validated models, were used to observe mixing inside the electrochemical reactors. Three different arrays were used for the rotating rings electrodes: (a) without impellers, (b) with four internal vertical fins and (c) with a pitched blade central impeller. Power consumption, torque, and parameters such as turbulent intensity, mixing time, among others, were evaluated for all configurations. The reactor with no impellers showed two separated zones of recirculation, reducing the reactor mixing and performance. The reactor with pitched blade impeller, showed no significant improvement due to its low central impeller pumping capacity at low rotational speeds (150 rpm). The array with 4 vertical fins operated at 130 rpm presented the highest flow/power ratio, and the lowest mixing time.