کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7060365 1458510 2015 19 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effects of fractal surface roughness and lithology on single and multiphase flow in a single fracture: An experimental investigation
ترجمه فارسی عنوان
اثرات زبری سطحی فراکتال و سنگ شناسی در جریان تک و چند فاز در یک شکستگی تک: پژوهش تجربی
کلمات کلیدی
زبری شکافت، ابعاد فراکتال، جریان تک فاز، هدایت هیدرولیکی، جریان چند مرحلهای در شکستگیهای تک، جابجایی حالت غیرمتعارف در شکستگی،
ترجمه چکیده
آزمایش ها بر روی هفت مدل کاملا شبیه سازی شده و شکست مدل های شکسته تقریبا شبیه سازی شدند که از شکستگی های مختلف هفت سنگ بلوک مختلف که به صورت مصنوعی از آزمایشات کششی غیرمستقیم آزمایشگاهی استفاده می شد، انجام شد. دیوارهای پایین تر و ماتقونی شفاف این مدل ها تجسم آزمایش های جریان را تسهیل می کنند. سطح خشن از شکستگی های مدل ابتدا دیجیتالی شد. سپس، با استفاده از داده های جمع آوری شده در تجزیه واریوگرام، زبری سطح با ابعاد فراکتالی اندازه گیری شد. پارامتر اندازه گیری زبری دیگر نیز به عنوان نسبت بین سطح کل سطح شکستگی و سطح سطح مسطح مورد استفاده قرار گرفت. اندازه گیری های تجربی جریان به صورت کمی نسبت به زبری سطح تحت شرایط مختلف بارگذاری طبیعی (دیافراگم) همبستگی دارد. همچنین آزمایشهای جابجایی با غلظت ثابت با سرعت ثابت برای ارزیابی اثر زبری نشان داده شده توسط هفت لیتولوژی مختلف و اثر مرطوب کنترل شده توسط مواد مورد استفاده در تولید نمونه های شکست در توسعه اشباع باقی مانده انجام شد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Experiments were conducted on seven perfectly-matching and tightly-closed rough model fractures reproduced from the single fractures of lithologically different seven rock blocks that were jointed artificially through laboratory indirect tensile tests. Transparent upper and opaque lower walls of these models facilitated the visualization of the flow experiments. Rough surfaces of the model fractures were first digitized. Then, using the gathered data in variogram analysis, surface roughness was quantified by fractal dimension. Another roughness quantification parameter was also handled as the ratio between total fracture surface area and planar surface area. Experimental measurements of flow were quantitatively correlated to surface roughness under different normal loading (aperture) conditions. Also, constant rate immiscible displacement experiments were performed to assess the roughness effect represented by seven different lithologies and wettability effect controlled by the material used in manufacturing the fracture samples on the residual saturation development.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Multiphase Flow - Volume 68, January 2015, Pages 40-58
نویسندگان
, , ,