کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7060469 | 1458519 | 2014 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Two-dimensional numerical investigation on the dynamics of ligament formation by Faraday instability
ترجمه فارسی عنوان
بررسی عددی دو بعدی در زمینه پویایی تشکیل رباط ها توسط بی ثباتی فارادی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
شکل گیری اتصالات از سطح یک لایه مایع افقی تحت لرزش عمودی (بی ثباتی فارادی) بخش مهمی از فرایند اتمیزه شدن است زیرا فاز انتقال برای تولید قطره است. بر اساس راه حل های عددی معادلات ایلر دو بعدی ناپایدار برای یک نمونه اولیه فرآیند بی ثباتی جریان، ما از نظر جسمی چگونه یک رباط مایع است که به صورت پویا از لایه مایع ارتعاشی آزاد است و رفتار می کند مانند یک جت را می توان تولید می شود. با توجه به نظریه خطی، مکش مایع از قسمت قوس به قسمت قله یک قله تقویت شده ایجاد می کند. تقریبا تمام لایه های مشتق شده در نظریه خطی به لایه مایع بازگردانده می شوند، مهم نیست که سطح تا چه اندازه تغییر می کند. بنابراین، یک رباط آزاد آزادانه هرگز شکل نمی گیرد. با این حال، تحت شرایط غیر خطی تولید شده توسط تغییر شکل بزرگ سطح، جریان مایع مضر از بخش چاه باعث افزایش فشار در ریشه بالا (رباط) می شود. این افزایش فشار دارای دو اثر عمده است. اولا، مقدار مایع مکیده شده از بخش فاضلاب را کاهش می دهد، که افزایش ارتفاع قله را در مقایسه با آنچه که مرتبط با نظریه خطی است کاهش می دهد. دوم، آن را فشار حداکثر محلی در ریشه کوه تشکیل می دهد؛ در این مورد، رباط فوق این مکان به صورت پویا از حرکت زیر بنا در فریم مرجع آزمایشگاهی آزاد می شود. عناصر مایع به طور مداوم به ناحیه مایع آزاد به صورت پویا وارد می شوند و یک لبه دار تیره از لایه مایع تولید می کنند.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Ligament formation from the surface of a horizontal liquid layer subject to a vertical vibration (Faraday instability) is a crucial part of the atomization process because it is the transition phase for droplet generation. Based on the numerical solutions of the two-dimensional incompressible Euler equations for a prototype Faraday instability flow, we explored physically how a liquid ligament that is dynamically free from the vibrating liquid layer and behaves like a jet can be produced. According to linear theory, the suction of liquid from the trough portion to the crest portion creates an amplified crest. The amplified crest is always pulled back to the liquid layer in linear theory, no matter how largely the surface deforms; thus, a dynamically freed ligament never forms. However, under nonlinear conditions produced by large surface deformation, the impinging liquid flow from the trough portion enhances the pressure at the high crest (ligament) root. This pressure enhancement has two major effects. First, it reduces the amount of liquid sucked from the trough portion, which abates the increase in the crest height compared with that associated with linear theory. Second, it forms a local maximum pressure at the crest root; in this case, the ligament above this location becomes dynamically free from the motion of the bottom substrate in the laboratory reference frame. Liquid elements continuously enter the dynamically freed liquid region, producing a slender ligament from the liquid layer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Multiphase Flow - Volume 60, April 2014, Pages 64-75
Journal: International Journal of Multiphase Flow - Volume 60, April 2014, Pages 64-75
نویسندگان
Yikai Li, Akira Umemura,