Ultrasonic pulse-Doppler flow meter application for hydraulic power plants

At hydraulic power stations, Pitot tubes have commonly been used to measure flow rates in steel penstocks for performance testing of hydraulic turbines. Due to the difficulties of Pitot tube installation, transit-time ultrasonic flow meters are becoming a popular replacement, but their accuracy is sensitive to velocity profiles that depend on Reynolds numbers and pipe surface roughness. Ultrasonic pulse Doppler flow meters have recently gained favor as suitable tools to measure flow rates in steel penstocks because they can measure instantaneous velocity profiles directly. Field tests were conducted at an actual hydraulic power plant using an ultrasonic pulse Doppler flow meter, and it was found capable of measuring velocity profiles in a large steel penstock with a diameter of over one meter and Reynolds number of more than five million. Furthermore, two ultrasonic transducers were placed on the pipe surface to validate the multi-line measurement of asymmetric flow. Each transducer recorded the velocity profile simultaneously from the pipe centerline to its far wall during plant operation. Velocity profiles were obtained from three-minute measurements to improve the accuracy of flow rate measurements.