کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7122815 | 1461493 | 2016 | 31 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of resistance type humidity sensor based on CaCu3Ti4O12 thick film
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
کنترل و سیستم های مهندسی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Fabrication of resistance type humidity sensor based on CaCu3Ti4O12 thick film Fabrication of resistance type humidity sensor based on CaCu3Ti4O12 thick film](/preview/png/7122815.png)
چکیده انگلیسی
A resistance type humidity sensor has been fabricated from an assembly of CaCu3Ti4O12 thick film, Ag interdigitated electrodes, and an Al2O3 ceramic substrate. The humidity sensing properties were measured using the direct current (DC) analysis method. The results show that the electrical properties of the CaCu3Ti4O12 thick film are dependent on humidity and applied voltage. At low humidity, the film exhibited low conductivity and behaved as an insulator. However, at high humidity, the conductivity of the film increased due to the enhancement of ion conduction. These outcomes indicate that the measured resistance is highly dependent on the applied bias voltage within the whole humidity range i.e. 20-90% relative humidity (RH) at ambient temperature. The response and recovery times as well as sensitivity were determined to be around 2.8Â min, 25Â min, and 98.2%, respectively. Therefore, it is concluded that CaCu3Ti4O12 thick film has good humidity sensing properties and has high potential in the application for fabrication of high-performance humidity sensors.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 94, December 2016, Pages 902-908
Journal: Measurement - Volume 94, December 2016, Pages 902-908
نویسندگان
Mohsen Ahmadipour, Mohd Fadzil Ain, Zainal Arifin Ahmad,