Towards an intelligent approach for CMM inspection planning of prismatic parts

This paper presents a model of prismatic parts (PPs) inspection planning on CMMs, in terms of an intelligent concept of inspection planning. The developed model is composed of Inspection Feature Construction, Sampling Strategy, Probe Accessibility Analysis, Automated Collision-Free Generation, and Probe Path Planning. In this model, the simulation of a measuring probe path is based on three algorithms: Algorithm for Measurement Points Distribution, Algorithm for Collision Avoidance, and Algorithm for Probe Path Planning. The simulation output is a measuring protocol for CMM UMM500. An experiment was performed on two PPs that have been produced for the purpose of this research. The inspection results show that all tolerances for both PPs are within the specified limits. The proposed model presents a novel approach for the automatic inspection and a basis for the development of an integrated, intelligent concept of inspection planning. The advantages of this approach imply the reduction of preparation time due to an automatic generation of a measuring protocol, a possibility for the optimisation of measuring probe path, i.e. the reduction of a time needed for the actual measurement and analysis of a workpiece, and an automatic configuration of measuring probes.